D-Link web-based user interface allows you to change your Wi-Fi password, Network Name (SSID), and other default router settings. The gateway IP address vary depending on the D-Link router model.
To access your D-Link router settings, type the IP address in the address bar of your web browser or click on the Login button below.
| Default IP Address | |
|---|---|
| 192.168.0.1 | |
| dlinkrouter.local | |
| 192.168.1.1 |
Your device must be connected to the router via Wi-Fi or an Ethernet cable.
The gateway IP address will only load on the browser when your device is connected to the router. For help, see How to find your router IP address? and Can’t connect to my Router login page; what do I do?.
Default Username and Password
Common D-Link routers default username and password combinations.
| Router Model | IP Address | Username | Password |
|---|---|---|---|
| DIR-615 | 192.168.0.1 | admin | admin |
| DIR-850L | 192.168.0.1 | admin | (leave the field blank) |
| DIR-300 | dlinkrouter.local | admin | (leave the field blank) |
| DIR-878 | dlinkrouter.local | Admin | (leave the field blank) |
| DIR-853 | 192.168.0.1 | Admin | [Printed on router sticker] |
| DSL-2730U | 192.168.1.1 | admin | admin |
| DSL-2877AL | 192.168.1.1 | admin | admin |
| DIR-825 | 192.168.0.1 | admin | [Set during initial setup] |
| DIR-645 | 192.168.0.1 | Admin | (leave the field blank) |
| DIR-600M | 192.168.0.1 | admin | (leave the field blank) |
| DIR-825 | 192.168.0.1 | admin | admin |
| DWR-M921 | 192.168.0.1 | admin | admin |
| Covr-2600R | dlinkrouter.local | Admin | (leave the field blank) |
| DWR-932C | 192.168.0.1 | admin | admin |
| DIR-853/ET | 192.168.0.1 | Not required | [Printed on router sticker] |
| DIR-612 | 192.168.0.1 | admin | (leave the field blank) |
| DIR-600L | 192.168.0.1 | admin | (leave the field blank) |
| DIR-615 | 192.168.0.1 | Admin | (leave the field blank) |
| DWR-M960 | 192.168.0.1 | admin | admin |
| DIR-850L | 192.168.1.1 | admin | [Printed on router sticker] |
| DIR-650IN | 192.168.0.1 | admin | admin |
| DIR-825M | 192.168.0.1 | admin | [Printed on router sticker] |
| DIR-816L | dlinkrouter.local | Admin | (leave the field blank) |
| DIR-819 | dlinkrouter.local | Admin | (leave the field blank) |
| DIR-865L | dlinkrouter.local | Admin | (leave the field blank) |
| DIR-842 | dlinkrouter.local | Admin | (leave the field blank) |
| DSL-2878 | 192.168.1.1 | admin | [Printed on router sticker] |
| DSL -2878AL | 192.168.1.1 | Not required | [Printed on router sticker] |
| DIR-890L | dlinkrouter.local | Admin | (leave the field blank) |
| DIR-879 | dlinkrouter.local | Admin | (leave the field blank) |
| DIR-882 | dlinkrouter.local | Admin | (leave the field blank) |
| DSL-2888A | 192.168.1.1 | admin | admin |
| DSL-2900AL | 192.168.1.1 | admin | admin |
| DSL-3890 | 192.168.1.1 | admin | [Printed on router sticker] |
| DSL-4320L | 192.168.1.1 | admin | admin |
| DSL-5300 | 192.168.1.1 | admin | admin |
| DSL-X1852E | 192.168.1.1 | admin | [Printed on router sticker] |
| DVA-2800 | 192.168.1.1 | admin | admin |
| DWR-M930DS | 192.168.0.1 | admin | [Printed on router sticker] |
Note: The default IP address, Username, and Password are printed on a sticker on the back or underside of the router. The password is blank by default for most D-Link routers.
How to login to D-Link router?
1) Connect your device to the router via an Ethernet cable or Wi-Fi connection.
2) Open a web browser and type the IP address in the address bar.
3) Enter the router username and password and click Login.
Change D-Link Wi-Fi Password and Network Name (SSID)
D-Link web interface varies depending on the router model and firmware version. Select a router model for your reference.
D-Link DIR-853
- Connect a device to the router, either via Wi-Fi or an Ethernet cable.
- Open a web browser and type http://192.168.0.1 in the address bar.
- Enter the Admin Password and click Log In.
- Go to Settings > Wireless.
- Enter the Wi-Fi network name in the Wi-Fi Name (SSID) field.
- Enter the Wi-Fi password in the Password field.
- Click Save.
You can also enable and configure the 5GHz network band from the Wireless Settings page.
D-Link DIR-615
- Connect a device to the router, either via Wi-Fi or an Ethernet cable.
- Open a web browser and type http://192.168.0.1 in the address bar.
- Enter the Username and Password and click Login.
- Navigate to Wireless > Wireless Basics.
- Enter the Wi-Fi network name in the Name(SSID) field.
- Select Security Options: WPA-PSK/WPA2-PSK AES.
- Enter the Wi-Fi password in the Pre-Shared Key field.
- Click Apply to save the changes.