Tenda web-based user interface allows you to change your Wi-Fi password, Network Name (SSID), and other default router settings. The gateway IP address vary depending on the Tenda router model.
To access your Tenda router settings, type the IP address in the address bar of your web browser or click on the Login button below.
| Default IP Address | |
|---|---|
| 192.168.0.1 | |
| tendawifi.com | |
| 192.168.1.1 |
Your device must be connected to the router via Wi-Fi or an Ethernet cable.
The gateway IP address will only load on the browser when your device is connected to the router. For help, see How to find your router IP address? and Can’t connect to my Router login page; what do I do?.
Default Username and Password
Common Tenda routers default username and password combinations.
| Router Model | IP Address | Username | Password |
|---|---|---|---|
| F3 | 192.168.0.1 | admin | admin |
| AC10 AC1200 | tendawifi.com | admin | admin |
| N301 | 192.168.0.1 | admin | admin |
| D1201 | 192.168.1.1 | admin | admin |
| AC5 | 192.168.0.1 | admin | admin |
| HG3 | 192.168.1.1 | admin | admin |
| N300 | 192.168.0.1 | admin | admin |
| AC15 | tendawifi.com | Not required | [Set during initial setup] |
| D301 | 192.168.1.1 | admin | admin |
| D301 v2 | 192.168.1.1 | admin | admin |
| AC6 | tendawifi.com | Not required | [Set during initial setup] |
| RX12 Pro | 192.168.0.1 | Not required | [Set during initial setup] |
| AC10U | 192.168.0.1 | Not required | [Set during initial setup] |
| AC5 | 192.168.0.1 | Not required | [Set during initial setup] |
| AC9 | tendawifi.com | Not required | [Set during initial setup] |
| AC21 | tendawifi.com | Not required | [Set during initial setup] |
| AC11 | tendawifi.com | Not required | [Set during initial setup] |
| FH456 | 192.168.0.1 | Not required | [Set during initial setup] |
| W268R | 192.168.0.1 | admin | admin |
| N60 | 192.168.0.1 | admin | admin |
| HG6 | 192.168.1.1 | admin | admin |
| 3G150B | 192.168.2.1 | Not required | admin |
| 4G03 Pro | tendawifi.com | Not required | [Set during initial setup] |
| V12 | 192.168.1.1 | admin | admin |
| TX9 Pro | 192.168.0.1 | Not required | [Set during initial setup] |
| AC8 | 192.168.0.1 | Not required | [Set during initial setup] |
| AX12 Pro v2 | tendawifi.com | Not required | [Set during initial setup] |
| 5G03 | tendawifi.com | Not required | [Set during initial setup] |
| AC10 v3 | tendawifi.com | Not required | [Set during initial setup] |
| AC10 v3 | tendawifi.com | Not required | [Set during initial setup] |
| TX12 Pro | tendawifi.com | Not required | [Set during initial setup] |
| AC21 | tendawifi.com | Not required | [Set during initial setup] |
| 4G03 | tendawifi.com | Not required | [Set during initial setup] |
Note: The default IP address, Username, and Password are printed on a sticker on the back or underside of the router. Some routers require you to create a new password during initial setup.
How to login to Tenda router?
1) Connect your device to the router via an Ethernet cable or Wi-Fi connection.
2) Open a web browser and type the IP address in the address bar.
3) Enter the router username and password and click Login.
Change Tenda Wi-Fi Password and Network Name (SSID)
Tenda web interface varies depending on the router model and firmware version. Select a router model for your reference.
Tenda N301
- Connect your device to the router via Wi-Fi or an Ethernet cable.
- Open a browser and type http://192.168.0.1 in the address bar.
- Enter the Login Password and click Login. For most Tenda router models, the password is printed on the label on the back of the router. If you are setting up for the first time, you may be required to set up the login password first.
- Select Wireless Settings.
- Enter the Wi-Fi network name in the WiFi Name field.
- Select Security Mode: WPA2-PSK.
- Enter the Wi-Fi password in the WiFi Password field.
- Click OK to save the changes.
Tenda D301 v4
- Connect your device to the router via an Ethernet cable or Wi-Fi.
- Open a browser and type http://192.168.1.1 in the address bar.
- Enter the User Name: admin and Password: admin and click Login.
- Go to Setup > WLAN > Basic.
- Enter the Wi-Fi network name in the SSID field and click Apply Changes.
- Go to Setup > WLAN > Security.
- Select Encryption: WPA2 Mixed, WPA Authentication Mode: Personal (Pre-Shared Key) and Pre-Shared Key Format: Passphrase.
- Enter the Wi-Fi password in Pre-Shared Key field and click Apply Changes.